DIN Rail – top hat rail mounting
of Raspberry pi Cases
Requirement: low priced mounting solution of existing Raspberry pi housing on a standard DIN rail.
![Fertig montiert](http://www.iot4pi.com/wp-content/uploads/2016/02/Hutschiene.png)
![Einzelteile](http://www.iot4pi.com/wp-content/uploads/2016/02/Hutschiene_2.png)
Material: PA 6
Color: schwarz RAL 9005
Standards:
RoHS compliant
DIN EN 60715 G32
DIN EN 60715 TH35
REACH compliant
2 holes ø 3mm on the housing required.
![Montage auf Gehäuse](http://www.iot4pi.com/wp-content/uploads/2016/02/Hutschiene_3.png)
![Sicht auf Bohrung](http://www.iot4pi.com/wp-content/uploads/2016/02/Hutschiene_4.png)
In order to prevent short circuit, the screws can be taped with an insulating tape.
Here, the clip on the DIN rail!
![eingehängter Clip Montage auf Hutschiene](http://www.iot4pi.com/wp-content/uploads/2016/02/Hutschiene_5.png)